Operation Check After Disassembling/Reassembling; Confirmation Methods - Canon BJC-8200 Photo Service Manual

Part 2: MAINTENANCE

3. OPERATION CHECK AFTER DISASSEMBLING/REASSEMBLING

3.1 Confirmation Methods

After reassembling, confirm the operation of the printer by conducting the following
procedures:
1) Test print for servicing using the printer only.
Verify correct print out using the method stated in
(Page 3-8).
After replacing either the logic board or the waste ink absorber, in addition to (1), it is
necessary to confirm the following points:
When the:
Logic board is replaced
Waste ink absorber is replaced
Part 3: 2.1 Service Mode Operations
Check items:
On the service/factory test print, confirm that the ROM
version and model name are correct, and that the
number of sheets passed has been cleared, and the
waste ink counter is set appropriately.
Printing the nozzle check pattern via the printer driver
is possible.
On the service/factory test print or EEPROM
information print, confirm that the total waste ink
amount has been cleared.
2-12
BJC-8200