Self-Test Printout - Canon BJC-5000 Service Manual

BJC-5000

3.3 Self-Test Printout

This printer provides a self-test printout function which can be executed without
connecting the printer to a computer.
After turning on the printer, press and hold down the POWER button . When the beeper
sounds once, release the POWER button . The self-test printout will start. To end the
self-test printout function, press either the RESUME button or the POWER button to turn
off the printer. The printing stops and the printed paper is ejected.
If you continue to hold down the POWER button until the beeper sounds twice when you
turn on the printer, the self-test printout function will not be executed and the printer
starts in the normal operation mode.
The self-test printout prints the following information on 1 page.
· ROM version
· Total number of pages passed
· Nozzle check pattern
After printing the above information, the printer returns to normal printing standby
status.
NOTE
Ver X.XX
XXXXXXXX
Printed with the first nozzle.
128
Printed with the 128th nozzle.
Black BJ Cartridge
Use A4/LTR-size paper for the self-test printouts. The self-test printout
function requires the A4/LTR-size paper width. If you use narrower
paper, ink will be smeared on the platen.
Control ROM Version No.
Total number of pages passed
Printed with
the right-side
cartridge
Figure 3-16 Self-Test Printout (Sample)
Printed with the first nozzle.
24
24
24
64
Printed with the 136th nozzle.
Printed with the left-side cartridge
Color/Photo BJ Cartridge
3-17
Part 3: Operating Instructions
Yellow 24 nozzles
Magenta
24 nozzles
Cyan
24 nozzles
Black 64 nozzles