Table of Contents
Advertisement
Part 5: Maintenance
BJC-5000
4.2.2 Carriage guide frame installation
The carriage guide frame adjusts the head gap between the BJ cartridge nozzles and
platen to obtain optimum printing quality. It is mounted on the printer frame.
The head gap must be adjusted only when the carriage guide frame position on the
printer frame is changed.
The screws fastening the carriage guide frame are painted red so that they are not
loosened during servicing. If the carriage guide frame position is changed
unintentionally, follow the procedure in
"5. ADJUSTMENTS" (page 5-8) to adjust the
head gap.
Carriage Guide Frame
Screw
Screw
Figure 5-3 Carriage Guide Frame
5-5
Advertisement
Table of Contents
