Table of Contents
Advertisement
Part 1: Safety and Precautions
Black BJ Cartridge
Nozzles
Nozzles
2.1.3 Power on/off
When the printer is turned off with the POWER button , the printer automatically caps
the nozzles of the BJ cartridge for their protection and to prevent ink leakage.
If the AC power cord of the AC adapter is unplugged unintentionally and the printer is
turned off without pressing the POWER button , the nozzles may not be capped. In
such cases, plug in the AC power cord of the AC adapter, turn on the power of the
printer, and then press the POWER button to turn it off again.
CAUTION
2.1.4 When not using the printer
Leave the BJ cartridge in the printer or store it in the BJ cartridge container when the
printer is not in use. Also keep the BJ cartridge installed in the printer or store it in
the BJ cartridge container while carrying, transporting, or storing the printer.
CAUTION
2.1.5 Ink electroconductivity
The ink in the BJ cartridge is electroconductive. If the ink leaks into the printer's
mechanical parts, use a paper towel to wipe off completely. If the ink leaks into the
printer's electrical parts, use a tissue paper to wipe off completely. If ink is spilled
under the IC chips on the printed circuit board (PCB) and is difficult to clean, replace
the PCB.
CAUTION
Joint Pipe
Nozzles
Figure 1-7 BJ Cartridge
If the nozzles are not capped properly, the ink may either dry out and clog
the nozzles or leak out.
If the BJ cartridge is removed from the printer and left lying about,
printing defects may occur when it is used again due to clogging of nozzles
and dried-out ink. If the BJ cartridge is removed to relocate the printer,
ink could leak out from the cap section.
Do not connect the AC power cord when ink has leaked into the electrical
parts. This could damage the circuitry.
Color BJ Cartridge
Joint Pipe
Ink Outlet
1-6
BJC-5000
Ink Outlet
Advertisement
Table of Contents
