Peco Perfomance Pro School T4900 Operating Manual page 26

enable sCHool sCHeDUle/ TeaCHeR KeY enable sCHool sCHeDUle/ TeaCHeR KeY enable sCHool sCHeDUle/ TeaCHeR KeY
Last active Setpoint appears first (depending on last
Heat/Cool demand). Press ▲/ ▼to adjust Setpoint.
i
note: An installer may set default duration
(see Service Menus 396/397) or limit user-
selection for maximum occupied duration
while thermostat is in Enabled/Disabled
mode (see Service Menus 398/399).
Press
Teacher/Override
temporary Heat/Cool Setpoints for Occupied/
unoccupied periods while thermostat is
operating in Enabled or Disabled modes.
1. Press
Teacher/Override
(Last active setpoint appears.)
2. Press ▲/ ▼to adjust Setpoint. Press
Teacher/Override
3. Press ▲/ ▼to set occupied duration.
means the thermostat
Hold Until
applies occupied settings until time
shown. note: Default time (4 hours)
applied (see Service Menu 396). Press
Teacher/Override
4. Press ▲/ ▼to adjust other Setpoint.
5. Press
Teacher/Override
settings and exit to Home Display.
(ConTInUeD)
key to apply
twice.
to advance.
to advance.
to apply
26