Enable Humidification/ Dehumidification - Peco Perfomance Pro School T4900 Operating Manual

enable HUMIDIfICaTIon/ DeHUMIDIfICaTIon

enable HUMIDIfICaTIon/ DeHUMIDIfICaTIon enable HUMIDIfICaTIon/ DeHUMIDIfICaTIon
Example shows how to program thermostat for
Dehumidify Control. Adjust the Dehumidify Setpoint.
The current zone's relative humidity shows at center.
i
note: Instruction assumes that the user
selects Option "01" in Service Menu 490.
(Options 0-3 are also available.)
If thermostat is model T4932SCH-002,
a humidity sensor is present, but it must be
enabled. A humidity sensor allows the user to
set dehumidify/ humidify control setpoints.
1. Enter Service Menu 490, and select
option "01" (for Dehumidify Control).
2. Press
Done.
3. Press to view more options.
More
4. Select
Humidity
note: "dE" appears in clock area.
Dehumidify Setpoint (e.g. 60%) fl ashes.
5. Press ▲/ ▼to select the desired
Dehumidify Setpoint.
6. Press Settings are saved.
Done.
Return to Default Display.
in the lower right.
24