Preparation; How To Access The Object Component - Brother FAX255 Service Manual

Preparation

Prior to proceeding to the disassembly procedure,
(1) Unplug
- the modular jack of the telephone line,
- the modular jack of the curled cord (and remove the handset), and
- the modular jack of an external telephone set if mounted. (Not shown below.)
(2) Remove
- the document support.
Telephone line cord

How to Access the Object Component

• On the next page is a disassembly order flow which helps you access the object compo-
nent. To remove the recording head, for example, first find it on the flow and learn its
number (d in this case). You should remove parts numbered 1 through 4, 6, 8, a,
b, and c so as to access the recording head.
• Unless otherwise specified, the disassembled parts or components should be reas-
sembled in the reverse order of removal.
Handset and
curled cord
IV – 3
Document
support