Brother FAX255 Service Manual page 106

Selector
No.
1 Not used.
2 Detection enabled time for CNG
and no tone
3
ACS* check sheet output function
4
on/off key
5 ACS* check sheet output function
6 Registration of station ID
7
Tone sound monitoring
8
l Selectors 2 and 3: Detection enabled time for CNG and no tone
After the line is connected via the external telephone or by picking up the handset of the facsimile
equipment, the equipment can detect a CNG signal or no tone for the time length specified by
these selectors. The setting specified by these selectors becomes effective only when selector 8
of WSW20 is set to "1."
Selector 4: ACS check sheet output function on/off key
l
If this selector is set to "0" (Operative), the user can toggle the ACS check sheet output function
on and off by pressing one-touch keys 01 and 05 simultaneously. If it is set to "1" (Inoperative),
the user cannot toggle the ACS check sheet output function from the control panel so that the
setting specified by selector 5 takes effect.
Selector 5: ACS check sheet output function
l
When selector 4 is set to "0," the setting specified by this selector becomes the default state of the
ACS check sheet output function. When selector 4 is set to "1," the setting specified by this
selector permanently takes effect.
Selector 6: Registration of station ID
l
Setting this selector to "0" permits the registration of station ID for Austrian and Czech versions.
Selectors 7 and 8: Tone sound monitoring
l
These selectors set monitoring specifications of the tone sound inputted from the line.
WSW18
(Function setting 3)
Function
V - 31
Setting and Specifications
No. 2 3
0 0 : 40 sec.
0 1 : 0 sec. (No detection)
1 0 : 5 sec.
1 1 : 80 sec.
0: Operative
0: ON
0: Permitted
No. 7 8
0 X : No monitoring
1 0 : Up to phase B at the
calling station only
1 1 : All transmission phases
both at the calling and
called stations
1: Inoperative
1: OFF
1: Prohibited
*ACS: Anti-curl system