Brother FAX255 Service Manual page 115

Selector
No.
1 Definition of programmable key
2 Ringer OFF setting
Automatic playback of OGM at the
3
start time of OGM ON mode
Detection of distinctive ringing
4
pattern
5
| Not used.
7
8 Motor overheating error indication
NOTE: Selector 1 is not applicable to the U.S.A. versions.
NOTE: Selectors 3 and 6 are applicable to those models equipped with a built-in TAD.
Selector 1: Definition of programmable key
l
This selector defines a programmable key as a TEL key or TEL/POLLING key.
Setting this selector to "1" allows the programmable key to function as either a TEL or POLLING
key if pressed when the handset is off or on the hook, respectively.
This setting is effective only for those models having a programmable key.
l Selector 2: Ringer OFF setting
This selector determines whether or not the ringer can be set to OFF.
Selector 3: Automatic playback of OGM at the start time of OGM ON mode
l
This selector determines whether or not the equipment automatically plays back an OGM the
moment it switches to the OGM ON mode in the MC mode.
Selector 4: Detection of distinctive ringing pattern
l
If this selector is set to "1," the equipment detects only the number of rings; if it is set to "0," the
equipment detects the number of rings and the ringing time length to compare the detected ringing
pattern with the registered distinctive one.
l Selector 8: Motor overheating error indication
If this selector is set to "0," the equipment displays the message "PRINTER FAULT" on the LCD
whenever a motor overheating error occurs so that any of the following happens and the
equipment aborts recording:
- The number of printed documents is five or less although the receiving operation continues for
15 minutes or more.
- The umber of printed documents is 10 or less although the receiving operation continues for 20
minutes or more.
WSW27
(Function setting 5)
Function
V - 40
Setting and Specifications
0: TEL key 1:
0: Yes 1:
0: No 1:
0: Yes 1:
0: No 1:
TEL/POLLING key
No
Yes
No
Yes