Brother FAX255 Service Manual page 104

Selector
No.
1 Automatic cutter
2 CCITT superfine recommendation
3
|
Not used.
6
7 Max. document length limitation
8 Stop key pressed during reception
Selector 1: Automatic cutter
l
This selector activates or deactivates the automatic cutter.
Selector 2: CCITT superfine recommendation
l
If this selector is set to "1," the equipment communicates in CCITT recommended superfine mode
(15.4 lines/mm). If it is set to "0," it communicates in native superfine mode.
Selector 7: Max. document length limitation
l
This selector is used to select the maximum length of a document to be sent.
Selector 8: Stop key pressed during reception
l
If this selector is set to "1," pressing the Stop key can stop the current receiving operation. The
received data will be lost.
WSW16
(Function setting 1)
Function
V - 29
Setting and Specifications
0: ON
0: OFF
0: 400 cm
0: Not functional
1: OFF
1: ON
1: 90 cm
1: Functional