Black Box PC001 User Manual page 69

PROTOCOL CONVERTER MODEL A/S-4
USSTAB = RJEINCDT
VPACING = 6
ISTATUS = ACTIVE
——————- APPLICATION VTAM PARAMETERS ——————-
BUFFACT = 10
TERMINAL (3776)
RMTnnn
LUTYPE 1
BUFFSIZE = 256 if MAXDATA = 265
512 if MAXDATA = 521
NOCMPCT
COMP or NOCOMP
CONDEST = nnn
CONSOLE or NOCON
(*) DISCINTV = 0
LINE = nnn
NUMPR = 1
NUMPU = 1
NUMRD = 1
PASSWORD = cccccccc
ROUTECDE = nn
SETUPMSG
SETUPINF
68
Table used by VTAM to interpret user logons
VTAM sends 6 RUs to NCP before response
LU comes up active, can be INACTIVE
Parameter used with BUFFLIM
——————- JESX Parameters ——————
SNA Remote Terminal
Logical Unit type 1 use SCS data
Buffer size of terminal LU
Compaction may not be used on this terminal
Blank and multiple character compression may
or may not be used
Console responses are to be directed to another terminal
Device other than a console printer may or may not receive
console messages
Terminal disconnect on idle condition, off
Logical connection between JESX and the terminal
Number of logical printers at terminal
Number of logical card punches at terminal
Number of logical card readers at terminal
Line password
Specify that input from this terminal will have the return desti
nation specified
Message telling operator to mount special forms
Message telling operator to mount special forms is displayed
at his terminal and not at host console, maybe SETUPACT
to display message at host also