Switching From A/S-4'S Main Menu To Running The Application - Black Box PC001 User Manual

The input allowed at this menu is one letter A thru J so to run or change an option. Listed below is a
brief description of what each letter gives you access to, refer to the section listed for more details.
Letter
A
B
C
D
E
F
G
I
J
K

6.4 Switching from A/S-4's Main Menu to Running the Application

Once all operating parameters have been configured properly, the A/S-4 is ready to run. To connect the
asynchronous devices to the application, enter the letter "A" for the RUN option of the A/S-4's Main
Menu. The A/S-4 will then proceed to connect up to the application in one of the following manners
depending on which of the three states the host communication line is in:
1. Modem not ready; if the modem is turned off or on a dial up line the modem has not been
dialed or on a lease line the line is down, the A/S-4 will display on the VDU "DIAL UP SDLC
LINE". Once the phone line connection with the host has been establish the A/S-4 will
proceed to one of the following two states. Refer to Section 13.0 on Trouble Shooting if the
Dial Up message will not go away for more information.
CHAPTER 6: Power Up and Configuration Menu Options
Section
6.4
6.5
6.6
6.7
6.8
6.9
6.10
6.12
6.13
6.14
Description
Run A/S-4 as options are currently set.
Change internal A/S-4 VDU type to
match terminal device. Changes table
of VDU video commands used by A/S-4.
Change commands sent to VDU to
perform functions like Home, Clear, etc.
Turn on or off video. Also change video
commands.
Change to different type keyboard
arrangements.
Arrange keys in desired order
on keyboard.
Change between applications,
Interactive or Batch mode of
data transfer.
Printer Options
Verify switch settings
Set all A/S-4 options to default values.
23