Changing Vdu Commands For Vdu Type Selected - Black Box PC001 User Manual

6.6 Changing VDU Commands for the VDU Type Selected
By selecting item C from the main menu (Section 6.3), the operator obtains the menu shown in figure 5.
Items from this menu can only be changed for programmable VDUs. This menu allows you to define
the video commands our VDU expects. You should consult your VDU users manual to determine what
the command characters are for the various VDU functions.
CURRENT:
Application = SDLC/SNA 3274/76 Interactive
VDU = NEW VDU
Keyboard = STANDARD
Change CMD VDU Responds to for:
A-Exit
B-ESC
C-ESC `
D-ESC a
E-ESC `
F-ESC a
G-ESC `
H-ESC a
I-ESC *
J-CTL ^
K-ESC =
L-
M-CTL @
N-
O-CTL @
P-NO
Enter Letter:
Figure 6 gives an example of how the operator would enter a new Home Cursor command to match his
VDU. Operator input is underlined.
To disable the two character Printer, Card or Disk on/off command, enter a space for the command,
also use a space to terminate the command.
CHAPTER 6: Power Up and Configuration Menu Options
VDU CMD to Follow (Set up 1st!!!)
Data to Printer:
Data to Printer:
Data to Card:
Data to Card:
Data to Disk:
Data to Disk:
Clear Screen
Home
Cursor Position: Start Char
Row Offset Value
Row/Col Separator
Column Offset Value
Final Char
Decimal Row/Col Values
Figure 5
Enter Letter: J Enter CMD: CTL Y
Figure 6
ON
OFF
ON
OFF
ON
OFF
27