Black Box PC001 User Manual page 68

TRANSFER = 7
MODETAB = INSTINCLM
SSCPFM = USSSCS
VPACING = 2
ADDR = C1
IRETRY = YES
MAXDATA = 265 or 521
terminal
MAXOUT = 7 if MAXDATA = 265
4 if MAXDATA = 521
MODETAB = RJEMODE
PASSLIM = 7 if MAXDATA = 265
4 if MAXDATA = 521
PUTYPE = 2
RETRIES = (1,3,5)
SSCPFM = USSSCS
DLOGMOD = BUF256 if MAXDATA = 265
BUF512 if MAXDATA = 521
ANS = STOP
BATCH = YES
BUFFLIM = 2
LOCADDR = 1 to 1
(1) PACING = 3
Name of table used by VTAM for line bind parameters
3770 RJE log-on is a character-coded log-on
—————- PU MACRO —————-
Line hardware hex address value
Retry poll operation on idle PU, maybe no
Maximum amount of (PIU) data NCP will xmit to the
Maximum number of data blocks (PIUs)
that NCP can xmit to PU before requesting an SDLC data link
acknowledgement
Name of table used by VTAM for PU bind parameters
Maximum number of PIUs that NCP can
xmit at one time
Physical Unit type 2
Retry 1, wait 3 seconds, do it 5 times
3770 RJE logon is a character-coded logon
Logmode entry used
Stop on automatic network shutdown, maybe CONTINUE
—————- LU MACRO —————-
Informs NCP that this is a BATCH LU
The product determines how many PPBUF elements VTAM
will receive from a LU until VTAM can transfer the data
to the application
Local address of this LU on the PU A/S-4 supports
only one LU
NCP to send 3 request units (RUs) before waiting for pacing
response
CHAPTER 12: System/Line Gen for Batch
67