Requesting A Reception Notice - Ricoh MP 161 Function Manual

Send Settings

Requesting a Reception Notice

You can confirm sent documents were properly received using e-mail or the
Journal.
When Reception Notice is set under "E-mail Options", the receiver sends back a
reception notice message. Once the reception notice message is received, "OK"
appears in the Result column of the Journal, allowing the originator to verify the
2
transmission was received.
Important
❒ The Reception Notice feature is only available if the receiver supports MDN
(Message Disposition Notification).
A
Place the original, and then select the scan settings you require.
B
Press [TX Mode].
C
Select [E-mail Options] using {U} or {T}, and then press the {OK} key.
D
Select [Return Receipt] using {U} or {T}, and then press the {OK} key.
E
Select [On] or [Off] using {U} or {T}, and then press the {OK} key.
The screen returns to that of step
F
Press the {Escape} key twice.
The standby screen returns.
To check the settings, press [TX Mode].
94
D
.