Requesting A Reception Notice - Ricoh Aficio 1027 Facsimile Reference Manual

Send Settings
F
Press the {Escape} key twice.
The standby screen returns.
To check the settings, press [TX Mode].
G
Specify a destination, and then press the {Start} key.
Note
2 ❒ If you send e-mail without setting a subject, a subject is automatically in-
serted. For details about how the subject is automatically inserted, see "E-
mail Subject" and "Received Images".
❒ You cannot send a subject only as e-mail without an original.
❒ For the maximum number of characters for an e-mail subject, see "Maxi-
mum Values".
Reference
p.29 "E-mail Subject"
p.121 "Received Images"
p.182 "Maximum Values"
"Entering Text", About This Machine

Requesting a Reception Notice

You can confirm sent documents were properly received using e-mail or the Journal.
When Reception Notice is set under "E-mail Options", the receiver sends back a reception
notice message. Once the reception notice message is received, "OK" appears in the Result
column of the Journal, allowing the originator to verify the transmission was received.
Important
❒ The Reception Notice feature is only available if the receiver supports MDN
(Message Disposition Notification).
A
Place the original, and then select the scan settings you require.
B
Press [TX Mode].
C
Select [E-mail Options] using {U} or {T}, and then press the {OK} key.
98