Ricoh MP 161 Function Manual page 24

Transmission
A
Make sure that Memory Trans. indicator lights.
1
Normally Memory Transmission mode is selected.
If it is not lit, Immediate Transmission mode is selected. Press the {Transmis-
sion Mode} key.
B
Place the original.
C
Make the scan settings you require.
D
Using the number keys or a Quick Dial key, specify a destination.
To specify a destination using a Quick Dial key, see "Using the Quick Dial
Keys".
If you make a mistake, press the {Clear/Stop} key, and then enter the correct
number.
E
When sending the same original to several destinations (broadcasting),
press [Add Dest] to specify the destinations.
You do not have to press [Add Dest] when adding a destination using the des-
tination list.
16
ASO023S