Loading Paper Into The Bypass Feeder - Olivetti CopyLab 200 User Manual

Loading Paper into the Bypass Feeder

If you have to manually insert a series of single sheets:
1.
Check on the Printer Driver Settings card, that Manual paper source is selected:
•
Open Printer Properties, following the instructions in Opening Printer Properties.
•
Select Manual paper source.
•
Click on the OK button.
2.
Start printing your document.
3.
A message on the Printer Monitor Status card and the
LCD will signal when the paper runs out.
Load the sheet and check that it is perfectly aligned
between the side guide and against the feed rollers.
Push it into the machine until it is picked up by the
feeder rollers.
If you want to use the bypass feeder for one sheet only, while Automatic paper feed is set, you can simply
execute the print command without loading the sheet (following the procedure described in Loading Paper
into the Bypass Feeder).
18 Printing Media