Printer Care Functions - Olivetti CopyLab 200 User Manual

Printer Care Functions

Press on the operator panel to access the menu. Continue to press
Press to access the submenu, which contains five functions.
INK LEVEL
When the LCD shows INK LEVEL, by pressing
the print heads.
Press to exit from the menu.
ALIGN PRINT HEADS
This function should be performed whenever you insert, remove or replace a print head (see Replacing Print
Heads).
When the LCD shows this function, by pressing
Once the alignment function has been completed, the machine will exit automatically from the menu.
CLEAN PRINT HEADS
When the LCD shows this function, by pressing
cycle. During the operation, the LCD shows CLEANING....
Once the cleaning function has been completed, the machine will exit automatically from the menu.
TEST PRINT HEADS
When the LCD shows this function, press
shows the message PRINTING.... The print test contains technical information about the printer emulation, the
firmware version and the conditions of the black and colour print heads.
Once the page has been printed, the machine will exit automatically from the menu.
DIAGNOSTICS
When the LCD shows this function, it also shows the number of pages printed (COPIES COUNTER). If you press
the LCD shows SCANNER COUNTER (number of scans). If you press
version of the machine with the date (REL. X.XX V.XXX DD/MM/YY).
Preventive Maintenance
on the operator panel, you can check the percentage of ink left in
on the operator panel, you can start the alignment procedure.
on the operator panel, you can execute a print head cleaning
on the operator panel to print the test page. While printing, the LCD
until the LCD shows PRINTER CARE.
again, the LCD will show the release and
,
37