Table of Contents
Advertisement
Image 15-1
Example of address set up
Changing the stored address of a linked display
1. Successively scroll through the menus Main (Cine VERSUM System), Installation, Display list.
2. Select in the display list the display you desire to change the address.
3. Press the jog dial or press ENTER to confirm.
The display settings menu for that specific display appears on the screen and on the graphical display.
4. Scroll through the display setting items, using the jog dial or up/down arrow keys on the Remote Control and select item IR
address 001.
5. Press the jog dial or press ENTER to confirm.
A text box appears on the screen (menu 15-9) and in the graphical display (menu 15-10) requesting to enter a new 3 digit address
value.
6. Enter a 3 digit number, from 000 to 256, using the number keys on the RCU.
Note: As the Remote Control can remote addresses from 000 to 009 only, it is recommended to use this range of addresses.
IR Address
Enter New Value
001
Menu 15-9
R5976468 CINE VERSUM SYSTEM 03112003
IR Address >Enter New Value
001
7 xga75_gs.c03
_________
Menu 15-10
15. Module Address Read out/Change
95
Advertisement
Table of Contents
