Direct Dial (Remote) Connection - Avaya PARTNER ACS R7.0 Getting Started Manual

4 Connecting to the PARTNER System

Direct Dial (Remote) Connection

With the Direct Dial (Remote) method, you dial an outside line that is assigned to
the external modem (PARTNER R7.0) or Remote Access card. Use this method
only if the system does not have an active voice messaging system. If the system
does have a voice messaging system activated, use the Automated Attendant
method.
This method has the following requirements:
• The PARTNER system must have either:
— an external modem that is connected to the Admin port of the
PARTNER R7.0 processor module, or
— a Remote Access card
• You must assign the outside line to a Hunt Group that will ring at the
external modem or PARTNER Remote Access card only. (See
the PARTNER System for Remote Direct Dial" on page
To connect to the PARTNER system via an outside line:
1 On the File menu, select Connect to PARTNER System.
The PC Administration Connection Options dialog box appears.
2 Click the Direct Dial option button, and then click the Next button.
3 Enter the phone number for the external modem or Remote Access card,
and then click the OK button.
4 When prompted, enter the Remote Administration Password, and then click
the OK button.
When the connection is completed, a message box appears.
5 Click the OK button.
32 Direct Dial Connection
Getting Started
"Configuring
33.)