Avaya PARTNER ACS R7.0 Getting Started Manual page 35

Getting Started
To connect to the PARTNER system via the COM Port option:
1 Perform one of the following steps:
— If your PC has a 9-pin serial port available, connect the DB-9 to DB-25
cable (AT modem cable) to the 9-pin serial port on the PC that is
running the PARTNER ACS R7.0 Administration software.
— If your PC has a 25-pin serial port available, go to Step 2.
2 Perform one of the following steps:
— If you are using a 9-pin serial port on your PC, connect the DB-25 to
RJ-45 adapter (355AF adapter or equivalent) to the DB-9 to DB-25
cable that you installed in Step 1.
— If you are using a 25-pin serial port on your PC, connect the DB-25 to
RJ-45 adapter (355AF adapter or equivalent) directly to the 25-pin
serial port on your PC.
3 Connect one end of a standard RJ-45 cable to the DB-25 to RJ-45 adapter
you installed in Step 2.
4 Connect the other end of the standard RJ-45 cable to the Admin port on the
PARTNER R7.0 processor module.
5 From the File menu in the PARTNER ACS R7.0 Administration window,
select Connect to PARTNER System.
The PC Administration Connection Options dialog box appears.
6 Click the option button of the COM port that is connected to the Admin port
on the PARTNER system, and then click the Next button.
7 When prompted, enter the Remote Administration Password, and then click
the OK button.
When the connection is completed, a message box appears.
8 Click the OK button.
4 Connecting to the PARTNER System
COM Port Connection 35