Table of Contents
Advertisement
Getting Started
Making Intercom Calls from Your PC
Before you can connect to your PARTNER system via an intercom extension,
you must perform the following steps:
1 Plug the line from your PC modem into an available extension port on your
PARTNER ACS system.
2 From extension 10 or 11, press f00.
3 Press the left i twice, and then press the right i once.
4 At the Extension: prompt, enter the extension number to which you
connected the PC modem in Step 1.
5 Press **.
6 Press the right i.
The display shows Automatic Line Selection.
7 Press ** to exit Automatic Line Selection.
8 Exit programming mode by pressing f00.
For more information about the location of special programming buttons on a
PARTNER phone, see the PARTNER system documentation.
4 Connecting to the PARTNER System
Direct Dial Connection
31
Advertisement
Table of Contents
