AT&T PARTNER II Release 3.1 Programming And Use Instructions page 172

Valid Entries
1 = Assigned to group
2 = Not Assigned to group
Programming
To assign extensions to a Hunt Group:
1. Press [
Feature
At the Group: prompt, enter a group number (1–7). For example, to select
2.
group 1, press [
Hunt Group 1
Extension:
Enter the number of the extension to be programmed. For example, to select
3.
extension 31, press [
4. To assign or unassign the extension, press [
value displays.
At this point:
5.
To assign or unassign another extension, press [
until the extension number shows on the display. Then repeat Step 4.
To program another group, press [
new group number, and repeat Steps 3 and 4.
6. Select another procedure or exit programming mode.
] [ ] [ ] [ ] [
0 0 System Program System Program
]. The display reads:
1
] [ ].
3 1
Hunt Group Extensions (#505)
] [ ] [ ] [ ] [
# 5 0
] until the appropriate
Next Data
] or [
Next Item
] [
Next Procedure Prev Procedure
].
5
]
Prev Item
], enter a
5-89