AT&T PARTNER II Release 3.1 Programming And Use Instructions page 198

Programming
To program a Night Service button at extension 10:
Press [
1.
Feature
At this point:
2.
If you want to assign Night Service to the first available button on the
system phone, press [
Night Service
1 Assigned-Ext10
If you want to remove the Night Service button assignment, press
[
Next Data
Night Service
2 Not Assigned
If you want to assign Night Service to a specific button, press [
display reads:
Night Service
3 Select Button
Then press a programmable button with lights to assign Night Service
to that button.
Select another procedure or exit programming mode.
3.
4. Label the Night Service button at extension 10.
Using
To turn Night Service on:
1. Press the Night Service button on extension 10.
If a System Password is programmed, the green light next to the button
flashes; you must go on to Step 2.
If no System Password is programmed, the green light is on steady and
Night Service is on.
Enter the password.
2 .
The green light is on steady. Night Service is on.
To turn Night Service off:
Press the Night Service button on extension 10.
1.
If a System Password is programmed, the green light next to the button
flashes; you must go on to Step 2.
If no System Password is programmed, the green light goes out and
Night Service is off.
2. Enter the password.
The green light goes out. Night Service is off.
] [ ] [ ] [ ] [
0 0 System Program
] until the display reads:
Next Data
] until the display reads:
] [ ] [ ] [ ] [
System Program # 5 0
Night Service Button (#503)
].
3
]. The
3
5-115