AT&T PARTNER II Release 3.1 Programming And Use Instructions page 150

Programming
To assign a name to an extension:
Press [
1 .
Feature
Enter the number of the extension to be programmed. For example, to
2.
program extension 12, press [
Press left [
3.
12 Enter name
If a name was previously assigned to this extension, it displays instead.
4 . Enter the two-digit code for each character you want to enter. (See Table 5-1
for codes.) For example, to enter the name Andy, press [
[ ][ ]. The display reads:
9 3
12 ANDY
5. If you make a mistake, you can press [
to enter the correct name.
Program a button for this extension or exit programming mode.
6.
] [ ] [ ] [
0 0 System Program
] [ ].
1 2
]. For extension 12, the display reads:
Intercom
] [ ] [
System Program Central Tel Program
][ ] [
2 1
] to clear the display. Repeat Step 4
Mic
Extension Name Display
].
][ ] [ ][ ]
6 2 3 1
5-67