AT&T PARTNER II Release 3.1 Programming And Use Instructions page 90

Allowed List Assignments (#408)
Description
This System Programming procedure lets you assign up to four Allowed Phone
Number Lists to specified extensions.
Related Features
You must use Allowed Phone Number Lists (#407) to create up to four lists of
allowed telephone numbers before you use this procedure.
Valid Entries
1 = Assigned to extension
2 = Not Assigned to extension
Programming
To assign Allowed Phone Number Lists to an extension:
Press [
1.
Feature
display reads:
AllowTo
Extension:
2. Enter the number of the extension to be programmed. For example, to
program extension 27, press [
AllowTo 27
List No:
3. Enter the list number (1–4). For example, to select list 1, press
To assign or unassign the list, press
4.
displays.
At this point:
5.
To assign or unassign another list to this extension, press [
[
Prev Item
4.
To program another extension, press [
begin at Step 2.
6. Select another procedure or exit programming mode.
] [ ] [ ] [ ] [
0 0 System Program
] [ ]. The display reads:
2 7
[
] until the list number shows on the display. Then repeat Step
] [ ] [ ] [
System Program # 4 0
]
until the appropriate value
Next Data
] [
Next Procedure Prev Procedure
Allowed List Assignments(#408)
] [ ]. The
8
[ ].
1
] or
Next Item
] and
5-7