AT&T PARTNER II Release 3.1 Programming And Use Instructions page 136

All Telephone Numbers in One Exchange. The following entries prevent
calls to the 976 exchange (since area codes have a 0 or 1 as the second
digit, entries in the form !0! and !1! prevent toll calls to all area codes):
-
Toll Call Prefix required
976
1!0!976
1!1!976
0!0!976
0!1!976
1976
0976
-
Toll Call Prefix not required
976
!0!976
!1!976
International Long Distance. To prevent international calls, enter the
international prefix numbers, 011.
Programming
To create a list of Disallowed Phone Numbers:
Press [
1 .
Feature
At the List No: prompt, identify the list to be set up (1–4). For example, to
2 .
select the first list, press [
At the Entry: prompt, select a list entry (01–10).
3 .
4 . At the Data------------ prompt, enter the first telephone number.
To save the telephone number in memory, you must press [
5 .
At this point:
6 .
To enter other phone numbers in this list, press [
Steps 4 and 5.
To change the phone number you just entered, press [
repeat Steps 4 and 5.
To delete the phone number you just entered, press [
To create another list, press [
Step 2.
Select another procedure using [
7 .
programming mode.
Prevents local calls
Prevents direct-dial calls to area codes with "0" as
the second digit
Prevents direct-dial calls to area codes with "1" as
the second digit
Prevents operator-assisted calls to area codes with
"0" as the second digit
Prevents operator-assisted calls to area codes with
"1" as the second digit
Prevents direct-dial toll calls in the same area code
(needed only when 0 or 1 is required for toll calls in
the same area code)
Prevents operator-assisted toll calls in the same area
code (needed only when 0 or 1 is required for toll
calls in the same area code)
Prevents local calls
Prevents calls to area codes with "0" as the second
digit, such as 203
Prevents calls to area codes with "1" as the second
digit, such as 212
] [ ] [ ] [ ] [
0 0 System Program System Program
].
1
Next Procedure
Next Procedure
Disallowed Phone Number Lists (#404)
] [ ] [ ] [ ] [ ].
# 4 0 4
].
Enter
] and repeat
Next Item
], and
Remove
].
Remove
] [ ] and go to
Prev Procedure
] or [ ] or exit
Prev Procedure
5-53