AT&T MERLIN LEGEND Release 2.0 MLX Direct-Line Consoles Operator's Manual page 127

Features
3. Press the DSS or Auto Dial button or dial the person's
extension.
4. For a transfer without consultation, hang up.
5. For a transfer with consultation, announce the call.
If the person accepts the call, hang up.
If the person does not accept the call, press the
If your system is not programmed for One-Touch Transfer,
you can use the following alternative method for transferring
an outside call only to a co-worker whose phone has the
same line buttons as your console.
1. Check the light next to the DSS or Auto Dial button for
the person's extension.
If the light is on, the person is unavailable.
See "Handling an Unsuccessful Transfer" in this section.
If the light is off, go to Step 2.
2. Press the button for the person's extension.
The call is put on hold and the extension is dialed automatically.
3. Announce the line that the call is on.
If the person accepts the call, hang up.
If the person does not accept the call, press the
line button with the held call to return to the call.
The call is transferred.
line button with the held call to return to the call.
He or she can answer the call by pressing the button with
the call.
4-59
Transfer