Headset Features - AT&T MERLIN LEGEND Release 2.0 MLX Direct-Line Consoles Operator's Manual

Features

Headset Features

If you want to use a headset, you should have two feature
buttons programmed on your console: Headset Status, to
turn the headset on and off, and Headset Hang Up, to
disconnect calls. (However, only Headset Hang Up is
required. ) You do not need to program a Headset Status
button unless you are going to use both the headset and the
handset. You can program Headset Status but the Headset
Hang Up button must be programmed by your system
manager.
You can program the console with Headset Auto Answer to
deliver calls automatically to the headset, so that you do not
need to press line buttons to answer calls. As each call
comes in, you hear a tone and you can begin speaking after
it.
Headset/Handset Mute temporarily turns off the microphone
in your headset or handset so that you can talk with someone
in your office without being heard by a caller.
To Program Headset Feature Buttons
1. Label buttons to be programmed as Headset Status,
Headset Auto Answer, or Headset/Handset Mute .
2. Press Menu.
Headset Features
4-27