Messaging - AT&T MERLIN LEGEND Release 2.0 MLX Direct-Line Consoles Operator's Manual

Features

Messaging

If co-workers cannot be reached, you can use either Leave
Message or Send/Remove Message to alert them that they
have messages waiting. Use Leave Message by choosing it
from the menu on your display; use Send/Remove Message to
leave an operator message by pressing a programmed
Send/Remove Message button or dialing a feature code.
Use the Posted Message button to let co-workers with
display telephones know when you are unavailable. See
"Posted Message" later in this section.
Co-workers can also leave messages on your display. For
more on receiving messages, see the MLX-10D, MLX-28D,
and MLX-20L Display Telephones User's Guide.
Leave Message
Use Leave Message to leave a display message for co-
workers with display phones.
Your co-worker's message light goes on after you leave the
message. (To use Leave Message you must be on a call
listening to ringing or a busy tone. ) If your co-worker does not
have a display, you will see Cannot Send Message on your
display. In this case, use Send/Remove Message instead.
4-30
Messaging