AT&T MERLIN LEGEND Release 2.0 MLX Direct-Line Consoles Operator's Manual page 101

Features
To Program a Send/Remove Message
Button
1. Label the button to be programmed as Send/Remove
Message.
Press Menu.
2.
Select Ext Program [Prog]
3.
If this feature is not displayed, press More.
4. Select Start.
Press the button you labeled Send/Remove Message.
5.
Select ListFeature [List] .
6.
7. Select Send/RmvMsg [SdMsg]
If this feature is not displayed, use FindFeature [Find] or press
More.
Press Home.
8.
To Use Send/Remove Message with a
DSS
1. Press Message Status.
The green light next to the button goes on.
2. Check the red light next to DSS button for the
extension.
If the red light is on, the person has an operator message. If the red
light is off, the person does not have an operator message.
.
.
Messaging
4-33