AT&T MERLIN LEGEND Communications System PBX System Planning Manual page 261

Index
O
Off-premises telephone, 1-4
station jack for, 2-19
One-Touch
Hold, 4-27
Transfer, 4-27
Operator features
Direct Station Selector, 4-13
direct-line console, 4-6
queued call console, 4-7
Operator Hold Timer
DLC, 4-6
QCC, 4-11
Operator position telephones, 2-15
Operator positions, station jacks for, 2-14 , 2-15
OPT. See off-premises telephone.
OPX. See off-premises telephone.
Ordering discussion for DS1 facilities, 3-35
Other digits for ARS, 4-49
Out-of-band signaling, 3-24
Outmode for tie trunk, 3-38
Outside trunk dial tone, 4-32
Outward restriction
and calling group delay announcement, 4-23
for Night Service, 4-36
Overflow Coverage for calling group, 4-25
P
Page buttons on Direct Station Selector, 4-12
Paging groups, 4-15
Paging, Loudspeaker
description, 1-4
trunk jack for, 3-5
Password
Night Service, 4-37
Remote Access, 3-11
PBX mode, Hybrid/, 2-10
PC. See personal computer.
Personal computer with MERLIN LEGEND System
Programming and Maintenance, 2-9
Personal Line
and Coverage, 4-17
button, 3-44
Remote Call Forward and, 4-4
PFT. See power failure transfer.
Pickup groups, call, 4-14
Placement of modules in control unit, 2-6
Planner, T1/lSDN-PRl, 3-30
IN-6
P o o l
button, 3-45
dial-out codes, 3-15
Pool dial-out code, 4-2
Pools, 3-14
Position Busy Backup for QCC, 4-10
Posted Message labeling, 4-39
Power failure transfer jacks, 2-3
Power failure transfer jacks and logical IDs, 2-7
Power supply module, 1-3
definition, 2-1
placement in control unit, 2-6
PRI. See Primary Rate Interface.
Primary Individual Coverage, 4-16
Primary operator position
types of, 2-14
Primary operator position, station jack for, 2-3
Primary Rate Interface facility, 3-25
designating DS1 facility as, 3-17
digital services on, 3-17
Principal user of personal line
and Coverage, 4-16
Principal user of personal line and Remote Call Forward, 4-4
Priority
elevate QCC queue call, 4-8
QCC queue, 3-10
Processor module
placement in control unit, 2-6
types of, 2-1
Programming equipment, 2-9
Q
QCC Message Center, 4-9
QCC operator receiving calls, 3-9
QCC queue
as receiver for Group Coverage, 4-18
directing types of calls to, 4-11
elevate priority within, 4-8
priority, 3-10
redirecting outside calls to, 4-32
QCC. See queued call console.
Queue Over Threshold, 4-8
Queue priority
QCC, 3-10
Queue priority, QCC
elevate, 4-8
Queued call console
Backup On button on, 3-10
features, 4-7
maximum numbers of, 2-15
station jack for, 2-14