Adding New Stations - AT&T MERLIN LEGEND Communications System PBX System Planning Manual

Modifications
See Chapter 2, lStation Jack
Connections" and, if appropriate,
'system Numbering."
See Chapter 3, "Trunk Assignment
Chapter 4, 'Features.'
Step 6
5-6 Adding to the System
If making more additions to the system, continue to Table 5-4. When planning is
complete, continue to Chapter 3 of System Programming.
Table 5-4 Adding New Stations
If adding
New stations
a
and
Operator console
Continue to Chapter 3 of System Programming.
If rearranging modules in the control unit, the numbering plan will revert to the
factory-set two-digit plan. You must then reprogram the system.
Collect a clean set of PBX System Planning Forms from Appendix A.
Locate the AT&T Equipment List, the local telephone company trunk
information list, the Floor Plan, and the analysis of the Employee
Communications Survey forms. If any of these materials has been revised,
you should have both the original and revised versions available.
Work through this book, starting at Chapter 2.
Complete
All columns of Form 2a, System
Numbering — Station Jacks
Copy of appropriate telephone
Form 4a through 5
C
Consider revisions to:
Group Assigned Features
(Forms 6b through 6e)
Allowed and Disallowed
List assignments (Forms 6g
and 6h)
Night Service assignments
(Forms 7a and 7b)
Station Labels (Form 8b)
Consider revisions to:
Operator Features (Form 6a)
Extension Status assignment
(Form 6f)