Telephone Features - AT&T MERLIN LEGEND Communications System PBX System Planning Manual

Features
Planning Form Instructions
For fax machines connected to a 008 OPT or 012 module, use PBX System
Form 4c, Tip/Ring Equipment.
For fax machine connected to an MLX telephone using an MFM, use the
back of PBX System Form 4b, Digital/ISDN (MLX) Telephone or PBX
System Form 5b, Direct-Line Console (DLC) - Digital/ISDN.
In the "Fax Machine Features" section, under the "Fax Machine Receiver"
heading:
1.
Check "No" if you are not assigning a receiver and continue to the
Operator Features" instructions.
2 .
Check the second box to assign a Message Waiting Receiver. Write the
extension number of the telephone acting as the receiver in the space
provided. (Refer to PBX System Form 2a, System Numbering -
Station Jacks.)
Under the "Fax Message Threshold" heading:
3 .
Check "10 second" to keep the factory-set threshold.
4 .
Check the second box to change the factory-set threshold. Write the
number of seconds in the space provided.
Locate copies of Forms 4a through 5c that describe specific telephone(s)
designated as receiver(s) of fax message-waiting indications.
Under the "Message-Waiting Receiver" heading:
5 .
Write the extension number of the fax machine that sends a message-
waiting indication to the telephone.
NOTE: You will fill in the rest of the optional telephone features later.

Telephone Features 4-5