In-Line Chlorine Feeders; Water Connections To Heat Pump - Aquacal Great Big Bopper Operation And Installation Manual

Page 18
GBB
4.3.c In-Line Chlorine Feeders
Always place in-line chlorinators as low, and as far downstream from the heat pump as possible. If an
erosion type feeder is used, always install a Hartford Loop to protect internal heat pump components.
4.3.d Water Connections to Heat Pump
The Great Big Bopper is supplied with 4" PVC plumbing unions. Connection to site plumbing is made
via PVC solvent cement to the female slip socket of the plumbing unions.
DO NOT PLUMB AS SHOWN HERE
GBB
GBB
[14.3 cm]
½
13 in
[34.3 cm]
¾
6 in
[17.1cm]
Figure 11
5 5/8 in
Figure 12