Using The Needle Threader - Euro-Pro 9105 Instruction Manual

USING THE NEEDLE THREADER

1
2
3
4
Raise the needle to its highest position.
Lower the presser foot.
1. Lower the needle threader lever slowly
and draw the thread through the
thread guide as illustrated and then to
the right.
2. The needle threader automatically
turns to the threading position and the
hook pin passes through the needle
eye.
3. Take the thread in front of the needle.
4. Hold the thread loosely and release
the lever slowly. The hook will turn and
pass the thread through the needle
eye in forming a loop.
Pull the thread through the needle eye.
Attention: Turn power switch to the
off position ("O").
11