Winding The Bobbin - Euro-Pro 9105 Instruction Manual

WINDING THE BOBBIN

1
3
5
7
9
Please Note: When the bobbin winder spindle is in "bobbin winding" position, the machine will
not sew and the hand wheel will not turn. To start sewing, push the bobbin winder spindle to the
left (sewing position).
2
3
2
4
Normal
6
8
10
1
1. Place the thread and spool holder onto
the spool pin. For smaller spools of
thread, place spool holder with the
small side next to the spool or use the
small spool holder.
2. Snap the thread into the thread guide.
3. Wind the thread clockwise around the
bobbin winder tension discs.
4. Thread the bobbin as illustrated and it
on the spindle.
5. Push the bobbin to the right.
6. When the bobbin winder spindle is
push to the right, "bobbin winding
position", the symbol
the LCD screen. It will disappear from
the LCD screen when the bobbin
winder spindle is push to the left,
"sewing position".
7. Hold the end of the thread.
8. Press on the foot control to start the
sewing machine.
9. After the bobbin has wind few turns
stop the machine and cut the thread
near the hole of the bobbin. Continue
filling the bobbin until it is full. The
bobbin winder will stop automatically
when the bobbin is full.
Stop the machine and cut the thread.
10.Push the bobbin winder spindle to the
left and remove the bobbin.
8
4~10
is shown on