Zipper Insertion - Euro-Pro 9105 Instruction Manual

ZIPPER INSERTION

I
Centered application
1
3
5
1.5~3.0
5 mm
2
4
6
Attention: Zipper foot should be used for
sewing center needle position straight
3.5
stitch only. It is possible that needle could
hit the presser foot and break when
sewing other patterns.
1. Baste the zipper opening on the garment.
2. Press open the seam allowance. Place the
zipper face down on the seam allowance
with the teeth against the seam line. Baste
the zipper tape.
3. Attach the zipper foot. Attach the right side
of the presser foot pin to the holder when
sewing the left side of the zipper.
4. Attach the left side of the presser foot pin to
the presser foot holder when sewing the
right side of the zipper.
5. Stitch left side of the zipper from top to
bottom.
6. Stitch across the lower end and right side
of zipper. Remove the basting and press.
34