Euro-Pro 9105 Instruction Manual page 39

ZIPPER INSERTION
Side application
1
3
5
5 mm
2
4
6
1. Baste the zipper opening on the garment.
2. Fold back to the left seam allowance. Turn
under the right seam allowance to form
3mm fold.
3. Attach the zipper foot. Attach the right side
of the presser foot pin to the holder when
sewing the left side of the zipper. Attach the
left side of the presser foot pin to the
presser foot holder when sewing the right
side of the zipper.
4. Stitch the left side of zipper from bottom to
top.
5. Turn the fabric right side out, stitch across
the lower end and right side of zipper.
6. Stop about 5 cm from the top of zipper.
Remove the basting and open the zipper.
Stitch the remainder of the the seam.
35