Blind Hem/Lingerie Stitch - Euro-Pro 9105 Instruction Manual

BLIND HEM/ LINGERIE STITCH
F
5mm
Reverse Overcasting
1
side stitches
2
4
5
1.0~2.0 2.5~4.0
5mm
Reverse
side
a
b
3
27
11: Blind hem/lingerie for firm fabrics
12: Blind hem for stretch fabrics
Note: It takes practice to sew blind hems.
Always make a sewing test first.
1. Fold the fabric as illustrated with the
wrong side uppermost.
2. Place the fabric under the foot. Turn the
handwheel forwards by hand until the
needle swings fully to the left. It should
just pierce the fold of the fabric. If it does
not, adjust the stitch width accordingly.
3. Adjust the guide (b) by turning the knob (a)
so that the guide just rests against the fold.
4. Sew slowly, guiding the fabric carefully
along the edge of the guide.
5. Turn over the fabric.