DigiDesign Pro Tools Reference Manual page 610

To AutoMatch all controls on a track:
Control-click (Windows) or Command-click
■
(Mac) the Automation Mode selector on the
track.
AutoMatching Individual
Automation Types
You can invoke AutoMatch on individual auto-
mation types across a session.
To AutoMatch all controls of one automation type:
In the Automation window, Control-click
■
(Windows) or Command-click (Mac) the button
for the automation type (Volume, Pan, Mute,
Plug-in, Send level, Send pan, or Send mute).
AutoMatching Individual Controls
(D-Control and D-Command Only)
On ICON worksurfaces, you can invoke Auto-
Match on individual controls or control types
on single channels.
To AutoMatch all controls of a type on a channel:
Hold Control (Windows) or Command (Mac)
■
and press any of the following in the Channel
Strip Mode controls for the track whose controls
you want to AutoMatch:
• Inserts
• Sends
• Pan
• Dyn (D-Control only)
• EQ (D-Control only)
To AutoMatch a pan control or the controls for an
individual insert or send:
Press the switch in the Channel Strip Mode
1
controls to display the Pan controls or the top
level of Inserts or Sends for the channel.
598 Pro Tools Reference Guide
Hold Control (Windows) or Command (Mac)
2
and press the Rotary Encoder Select switch for
the control you want to AutoMatch:
• For Sends, the Send level, pan, and mute
will AutoMatch.
• For Inserts, all automated controls will
AutoMatch.
• For Pan, all pan sliders on the channel will
AutoMatch.
To AutoMatch all controls for a plug-in displayed in
the Dynamics or EQ section:
Hold Control (Windows) or Command (Mac)
■
and press the Auto switch in the Dyn or EQ sec-
tion of the console.
Priming Controls for Writing
Automation in Latch Mode
If a track is in Latch or Touch/Latch automation
mode, you can prime individual controls for
writing automation while the transport is
stopped. This Latch Prime capability lets you pre-
pare for an automation pass before starting play-
back.
To prime controls for writing automation in Latch
mode while the transport is stopped:
Choose Setup > Preferences and click Mixing.
1
Under Automation, select Allow Latch Prime
2
in Stop.
Click OK to close the Preferences window.
3
In the Automation window, make sure the
4
controls you want to automate are write-en-
abled.