DigiDesign Pro Tools Reference Manual page 302

Hide thumbs Also See for Pro Tools:
Table of Contents

Advertisement

Use of the Trim tool is affected by the current
Edit mode: Shuffle, Slip, Spot, or Grid. See "Edit
Modes" on page 280 for more information.
The Trim tool can also be used to lengthen
and shorten MIDI notes (see "Trimming
Note Start and End Times" on page 467),
and also to scale automation and controller
data up or down "Drawing Automation" on
page 605.
To trim a region with Trim tool:
Select the Trim tool. With Pro Tools HD, click
1
the Trim tool pop-up menu and select "Stan-
dard."
Trim tool
Move the cursor near the start or end of the re-
2
gion, so the Trim tool appears.
Trim tool
To reverse the direction of the Trim tool, press
Alt (Windows) or Option (Mac).
Do one of the following:
3
• If trimming the end, drag left to shorten
the region, right to lengthen.
– or –
• If trimming the start, drag right to shorten
the region, left to lengthen.
When working with audio, you cannot trim
past adjacent regions.
When trimming regions in a stereo or multi-
channel track, all channels are trimmed.
290
Pro Tools Reference Guide
When using Shuffle mode, adjacent regions are
slid as necessary to make room for the edited re-
gion. If using Grid mode, the dragged start/end
times snap to the nearest Grid boundary. If us-
ing Spot mode, the Spot dialog opens, where
you can enter the new location for the region's
start or end point.
Time Compression/Expansion
Trim Tool
The Time Compression/Expansion Trim tool is a
convenient tool for matching an audio region to
the length of another region, a tempo grid, a
video scene, or to practically any other reference
point you want.
Time Compression/Expansion Trim tool over a region
The Time Compression/Expansion Trim tool
works by using the Time Compression/Expan-
sion (TC/E) AudioSuite plug-in (or a third party
plug-in) to create a new audio file. You use this
tool by dragging the region's start or end point
to expand or compress the region.
With Pro Tools HD or LE with DV Toolkit
2, you can match an Edit selection to the
length of a Timeline selection by selecting
Edit > TCE Edit to Timeline Selection com-
mand (see "TCE (Time Compression and
Expansion) Edit To Timeline Selection" on
page 323.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pro Tools and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Pro tools 7.2

Table of Contents