DigiDesign Pro Tools Reference Manual page 384

If desired, select the Enable Crossfade option.
4
This will create a crossfade at the loop point. To
edit the loop crossfade, do the following:
• Click the Settings button.
• Configure the Loop Crossfades.
• Click OK.
Loop Crossfade dialog
In the Region Looping dialog, click OK.
5
To rename the looped region name only (or the
region name and disk file name):
Double-click the loop icon with the Grabber.
■
To unloop a looped region:
Select the looped region.
1
372 Pro Tools Reference Guide
Choose Region > Unloop. The Unloop Re-
2
gions dialog opens.
Unloop Regions dialog
Do one of the following:
3
• Click Remove to unloop and remove all
loop iterations except the first full loop it-
eration.
– or –
• Click Flatten to unloop and create individ-
ual regions from each loop iteration.
Region Ungroup functions on loops the
same as using the Unloop command and
choosing Flatten.
To unloop and ungroup a selection down to its
individual regions:
Select a looped region that contains one or
1
more region groups.
Choose Region > Ungroup All.
2
Unlooping and Flattening Looped Regions with
Separate Regions Menu Commands
The Separate Regions commands (At Selection,
On Grid, and At Transients) will automatically
unloop and flatten looped regions before sepa-
rating.