DigiDesign Pro Tools Reference Manual page 260

Display of DestructivePunch
Status
Transport Record Enable Button
The Transport Record Enable button indicates
DestructivePunch mode and Record status as
follows:
When DestructivePunch mode is enabled:
The letters "dp" appears in the Transport
◆
Record Enable button.
Transport Record Enable button with DestructivePunch
mode enabled
If at least one track is DestructivePunch-en-
◆
abled, the Transport Record Enable button lights
solid blue.
DestructivePunch status in the Transport window
When DestructivePunch mode is enabled and the
transport is armed for recording:
If no tracks are DestructivePunch-enabled, the
◆
Transport Record Enable button flashes gray and
red.
If at least one track is DestructivePunch-en-
◆
abled, the Transport Record Enable button
flashes blue and red.
If at least one DestructivePunch-enabled track
◆
is also record enabled, the Transport Record En-
able button flashes blue and red, and the record
LED lights.
248 Pro Tools Reference Guide
DestructivePunch Enabled
Record LED
Input Status
LED
Whenever at least one audio track is record-
◆
ing, the Transport Record Enable button lights
solid red.
Track Record Status Display
When Pro Tools is in DestructivePunch mode,
each track's Record Enable button indicates its
DestructivePunch and record enable status as
follows:
• When a track is both DestructivePunch-en-
abled and record-enabled, its Record Enable
button flashes blue and red.
Record Enable button
DestructivePunch status indication in an audio track in
the Mix window
• When a track is DestructivePunch-enabled
but not record-enabled, its Record Enable but-
ton lights solid blue.
• When a track is record-enabled only, its
Record Enable button flashes red.
• While a track is recording (in any mode), its
Record Enable button lights solid red.
Red (not flashing) indicates recording
(all modes)
Track Record status in the Edit window