DigiDesign Pro Tools Reference Manual page 503

Duration Enable to influence the durations of
the selected MIDI notes. At a setting of 100%,
durations are changed to match the current
groove template. Set to 200%, durations in-
crease and decrease based on the ratio of the
original duration of the selected notes and the
durations in the template.
The default value for the Duration slider is
100%.
Beat Detective does not currently extract du-
ration information from audio perfor-
mances. DigiGroove templates created us-
ing Beat Detective contain a fixed duration
value that is 50% of the selected template
resolution (see "Defining a Beat Detective
Selection" on page 440).
Velocity Enable to influence the velocities of the
selected MIDI notes. If the slider is set to 0%
there is no change to the selected velocities, a
setting of 100% sets all velocities to match the
current groove template. A velocity setting of
200% typically results in over-exaggerated ve-
locities—loud notes increasing and soft notes
decreasing in volume.
For example, if two adjacent notes have equal
velocities of 80, and the two corresponding tem-
plate velocities are 70 and 90, setting the slider
to 200% changes both to velocities of 60 and
100.
The default value for the Velocity slider is 100%.
Slider Settings
To Save the groove template with the current
Options Slider Settings:
In the Grid/Groove Quantize window, click
1
the Save button.
Save User Groove Template Settings
Enter or edit any comments you want to save
2
with the template.
Do one of the following:
3
• Click the Save button to save the groove
template with the current Options Slider
Settings.
– or –
• Click the Save As button to make a copy of
the groove template with the current Op-
tions Slider Settings. In the resulting Save
dialog, enter a name for the copy and click
Save.
Slider settings may be lost if any of the following
operations are performed without saving the
settings first:
• Another MIDI Operations window is se-
lected.
• The MIDI Operations window is closed.
• You switch to another groove template.
Recall With Template
Restores all Groove Quantize Options to the set-
tings that are saved with the current template.
Chapter 23: MIDI Operations 491