Front Turn Signal/Parking Lamp; Front Fog Lamp - Chrysler Sebring Owner's Manual

Front Turn Signal/Parking Lamp

1. Raise and prop open the hood.
2. Rotate the bulb's electrical connector one-quarter turn
counterclockwise and remove it from the headlamp
housing.
MAINTAINING YOUR VEHICLE 385
3. Remove the bulb from the connector socket and install
the replacement bulb.
4. Install the bulb and connector assembly into the
headlamp housing and rotate the connector one-quarter
turn clockwise to lock it in place.

Front Fog Lamp

NOTE: Access to the lamps through the lower fascia
cutout is limited. We recommend you access the lamps by
turning the steering wheel to allow access and remove
the inner fender shield.
7