To Lock The Doors - Chrysler Sebring Owner's Manual

2. Release both buttons at the same time.
3. Test the feature while outside of the vehicle, by
pressing the LOCK/UNLOCK buttons on the RKE trans-
mitter with the ignition in the LOCK position, and the
key removed.
4. Repeat these steps if you want to return this feature to
its previous setting.
NOTE: Pressing the LOCK button on the RKE transmit-
ter while you are in the vehicle will activate the Vehicle
Security Alarm system. Opening a door with the system
activated will cause the alarm to sound. Press the UN-
LOCK button to deactivate the Vehicle Security Alarm
system.
Illuminated Approach — If Equipped
This feature activates the headlights for up to 90 seconds
when the doors are unlocked with the RKE transmitter.
The time for this feature is programmable on vehicles
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23
equipped with EVIC. For details, refer to "Electronic
Vehicle Information Center (EVIC)/Personal Settings
(Customer-Programmable Features)" in "Understanding
Your Instrument Panel" for further information.

To Lock the Doors

Press and release the LOCK button on the RKE transmit-
ter to lock all doors. The turn signal lights will flash and
the horn will chirp once to acknowledge the lock signal.
Sound Horn with Lock
This feature will cause the horn to chirp when the doors
are locked with the RKE transmitter. This feature can be
turned on or off. To change the current setting, proceed as
follows:
• For vehicles equipped with EVIC, refer to "Electronic
Vehicle Information Center (EVIC)/Personal Settings
(Customer-Programmable Features)" in "Understand-
ing Your Instrument Panel" for further information.
2