Chrysler Sebring Owner's Manual page 42

2010
Hide thumbs Also See for Sebring:
Table of Contents

Advertisement

WARNING! (Continued)
• Wearing your belt in the wrong place could make
your injuries in a collision much worse. You might
suffer internal injuries, or you could even slide out
of part of the belt. Follow these instructions to
wear your seat belt safely and to keep your pas-
sengers safe, too.
• Two people should never be belted into a single
seat belt. People belted together can crash into one
another in a collision, hurting one another badly.
Never use a lap/shoulder belt or lap belt for more
than one person, no matter what their size.
Lap/Shoulder Belt Operating Instructions
1. Enter the vehicle and close the door. Sit back and
adjust the seat.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41
2. The seat belt latch plate is above the back of the front
seat, next to your arm. Grasp the latch plate and pull out
the belt. Slide the latch plate up the webbing as far as
necessary to allow the belt to go around your lap.
Pulling Out the Latch Plate
3. When the belt is long enough to fit, insert the latch
plate into the buckle until you hear a "click."
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sebring 2010

Table of Contents