ST15150N/ND/W/WD/WC/DC Product Manual, Rev. D
10.0
10.1
10.1.1
Drive configuration
This section describes how to configure Barracuda 4 drives. Option headers
may be used to customize many functions of the drives for your particular
system. You can also synchronize the spindles of two or more ST15150N/
ND/W/WD drives using circuit-board connectors. ST15150WC/DC drives
use J4 pin 6 for synchronizing spindles.
Option headers
The headers described in this section enable you to configure the drive to
meet specific functionality requirements.
ST15150N/ND drives option headers
SCSI I/O
Connector
Pin 1
Figure 19. ST15150N/ND drives option header locations
ST15150N and ST15150W models can be terminated using option headers.
ST15150ND, ST15150WD, ST15150WC, and ST15150DC models must be
terminated externally. See Section 10.4.
J4 J01
DC Power Connector
47